Everything to Know About Sumatran Coffee

Everything to Know About Sumatran Coffee

Greyscale Photo Biking Facebook Post

A quick show of hands for those who absolutely love Sumatran coffee – we bet it was love at first ‘sip’ for you! Coffee lovers can instantly recognize rich coffee beans and their amazing taste.

One of the most exquisite coffee beans in the world is one of the most popular types of Sumatran coffee. The origins of this coffee can be traced back to Sumatra, one of the islands belonging to Indonesia’s cluster. Sumatra is the sixth largest island in the world and is home to almost 50 million people.

In addition to having the largest volcanic lake in the world – Lake Toba, Sumatra is known for the most popular product it spills out – Sumatran coffee.

Sumatran coffee is known for its distinct taste and is an absolute hit among coffee lovers worldwide. If you also love experimenting with different types of coffee from parts of the world, you should definitely give Sumatran coffee a try.

But before that, let’s tell you all you need to know about the heavenly Sumatran coffee. Let’s get started:

How is Sumatran coffee grown and processed?

As we know, the environment in which coffee is grown and the method used to grow it are two important factors that affect the taste of coffee. So let’s understand where Sumatran coffee gets its special taste.

katya austin Adg9B8NTxj0 unsplash

Sumatran coffee is mostly wet-shelled, which is a coffee cultivation method that is only specific to certain parts of the world. Wet peeling is also known as ‘Giling Bashan’, which is the most common coffee treatment method in Sumatra.

The process begins with the farmers removing the skin of the coffee cherries immediately after picking them. The skin is removed using homemade machines, after which the peeled beans are stored overnight in woven bags for fermentation.

The next day, the farmers wash the remaining fruit, while the beans are allowed to dry partially in the yard. This coffee is then ready to be shipped, after which the parchment is removed and the beans are further laid to dry. After the beans are dried as much as necessary, they are ready to be exported.

When the shipment arrives at the port of destination, they are dried again (for the third time) in the port city.

Typically, coffee is dried in other parts of the world with pulp. Sumatran coffee is peeled when wet, at about 40% moisture.

At this stage, you can even bite into a coffee bean if you chew on it! Apart from the wet peeling, the local climates, microclimates, microbes and plant varieties also contribute to the unique taste of this insane coffee.

What are the Benefits of Wet Hulling Coffee Beans?

The wet peeling process leaves the Sumatran coffee beans moist for a long time. It involves three drying steps, which ensure that the moisture level in the coffee beans remains above 11% for a longer period of time.

Wet peeling is popular in the Sumatra Islands as the climate does not allow the farmers to dry the beans completely.

washed coffee gb9086316d 1920

Sumatran coffee cherries are much more wet (compared to other coffee varieties) when peeled.

The beans actually take a beating throughout the process. The slightly damaged coffee cherries only enhance the taste of the coffee.

While Sumatran weather is perfect for coffee plantations to thrive, it poses a problem in the finishing stages. One moment the sun is shining brightly over Sumatran island and the next moment it is raining heavily.

As complicated as it sounds, the only thing we care about is the taste of the coffee! As long as the coffee tastes (and smells) great, we have nothing to complain about, right?

The tempting taste of Sumatran coffee beans

The whole process of drying the Sumatran coffee beans is tedious, but worth all the effort!

After all, we get coffee beans that smell heavenly and taste exquisite. The natural process of drying the beans and their extended drying time ensures that the coffee beans have a subtle taste and earthy aroma.

Sumatran coffee beans are an amazing blend of mossy, wild, spicy and spongy flavors.

coffee g38767071c 1920

Every coffee lover would interpret the taste of Sumatran coffee differently – so you do not get a single answer on how Sumatran coffee really tastes!

The Sumatran coffee beans are already full of flavor, and the three-layer finishing steps of the beans only enhance the taste of the beans.

Creamy, sweet with a touch of caramel – it’s the bold and funky taste of coffee – that every coffee lover should definitely try.

We are sure you will fall in love with it! As someone trying Sumatran coffee for the first time, you can spend some time getting a taste for the dark and brooding taste of this coffee.

We freshly roast our Sumatran coffee beans every time someone places an order. We prefer beans from Sumatra roasted dark to help bring out the rich, sweet caramel / butter caramel flavors. You will not be able to put your cup away from you after brewing some of our Sumatran coffee beans.

Is Sumatran coffee a dark roasted coffee?

Coffee experts say Sumatran coffee beans should be roasted within three months of harvest. Since it is raw processed, the beans have a shorter shelf life than regular coffee beans. However, not all Sumatran coffee beans are wet-peeled. If they are not wet-peeled, the beans are either washed or dried.

The taste of the coffee is still intact and the beans still taste wonderful.

Sumatran coffee is often known to be a dark roasted coffee, but the location of the coffee has nothing to do with the roasting profile of the coffee.

The roasting profile of the coffee depends entirely on the person roasting the coffee. However, since Sumatran coffee is expected to have a dark-roasted profile, roasting masters typically choose only the dark-roasted.

As Sumatran coffee has a rich taste, it is one of the most sought after types of coffee at the best coffee houses. Huge amounts of Sumatran coffee are purchased by Starbucks to be used as a base in their espresso and coffee selection.

hans vivek gfLlvYFD7NE unsplash 1

Starbucks in particular roasts the coffee very dark to ensure that the taste of their coffee is up to the mark. Starbucks worldwide serves only Arabica coffee.

The three main coffee varieties from Sumatra are Mandheling, Lintong and Gayo.

Mandeleling is grown on the northern plains of Sumatra and is known to be the best coffee beans produced on Sumatra. It is one of the rare Indonesian coffee varieties and is named after the Mandheling people who grew this coffee variety.

These beans can be brewed into a rich, strong cup of coffee – just like most coffee lovers around the world do!

The Lingtong beans are grown on a high plateau overlooking Lake Toba. Like other Sumatran coffee beans, this variety also has a rich taste and aroma. The Gayo beans are grown in the northern Aceh region and are known for their intense flavor.

How to brew Sumatran coffee beans?

Each of us has our preferences when it comes to coffee. Sumatran beans should definitely be one of the coffee beans in your collection.

The strong and bold taste of Sumatran beans is suitable for brewing these espresso shots. Brewing wet beans can be a chore, but with a little practice you can definitely find the perfect flavor too.

coffee g0d7d33495 1920

You can use an espresso machine, or if you do not have one, you can also cold brew the coffee.

Cold brewing of the coffee allows the taste to develop slowly, which improves the taste and lowers the acidity. Cold brews are packed with antioxidants and are easier on your teeth and stomach compared to your usual cups of coffee.

Interesting facts about Sumatran coffee

Now that you understand how Sumatran coffee beans get the taste and aroma they have, let’s find out some more exciting facts about Sumatran coffee:

  • Indonesia is the fourth largest coffee producer in the world and is followed only by Brazil and Vietnam. Most of the coffee produced by Indonesia comes from the Sumatran Islands.
  • The most popular varieties of Sumatran coffee are Arabica and Robusta coffee. Both of these coffees are grown in the fertile areas of northern Sumatra. The majority of the districts in North Sumatra produce Arabica coffee, while the other regions focus primarily on Robusta coffee.
  • Sumatran coffee has a unique taste only because of the way it is grown. It has a smooth texture and smells sharp and also comes with a beautiful mix of aromas. The half-washed and dry-processed coffee helps retain its amazing flavor. It is also planted in height, and the ideal soil contours ensure that its taste remains intact, even when exported worldwide.
  • Sumatran coffee is completely organic and is grown without the use of chemicals. This also affects the harvesting speeds, which slows down coffee production. Chemicals can certainly help boost the coffee harvest, but sumatran farmers prefer to use fertilizer. In addition, coffee farmers are not trained and instructed to grow and pick coffee – which is another problem when it comes to the low harvest of coffee beans.
  • Just as farmers prefer to grow coffee organically, they also ensure that coffee is processed in the traditional way with minimal chemical intervention. This ensures that the taste and aroma of the coffee is intact and just as required. Like other Indonesian coffees, Sumatran coffee is also authentic and unique, thanks to the traditional processing methods used.
  • In addition to Arabica and Robusta coffee, there is another popular coffee from the Sumatran islands – the Luwak coffee. In fact, it is one of the most expensive coffees in the world. It is priced at as much as 150 USD per. 500 grams! Luwak coffee is obtained from mango excrement, and this mango breed loves to eat coffee beans. It is popular not only in Indonesia but also all over the world thanks to its unique taste and fragrant aroma.
  • Arabica coffee is another popular variant of Sumatran coffee. It is grown in one of the most fertile regions of Sumatra, at an altitude of 1300 m above sea level. It is one of the oldest coffee cultures and has existed since the Dutch colonial level. Even after all these years, Arabica coffee is still extremely popular all over the world.
  • Over the years, domestic coffee consumption in Indonesia continued to remain the same, as Indonesians typically preferred tea over coffee. But in the last few years, the domestic consumption of various coffee varieties in Indonesia (including Sumatran coffee) has increased. This is thanks to the rise of cafe culture and the changing preferences of the younger generations.


If you are someone who can not kickstart your day without a cup of strong, hot coffee, you should definitely try the Sumatran coffee varieties. The coffee beans from this region come with distinct and unique flavors, and you are sure to find a variant that also best suits your taste! So what are you waiting for? Get your cup of Sumatra coffee right away!

Are you now interested in trying some amazing Sumatran coffee beans with a single origin? Try some of our freshly roasted Sumatran coffee!


How to Remove Black Stainless Steel Coating- all best home

How to Remove Black Stainless Steel Coating- all best home

How to Remove Black Stainless Steel Coating- all best home

We are reader supported. When you buy through links on our site, we can earn an affiliate commission. As an Amazon affiliate, we also profit from qualifying purchases.

Black stainless steel appliances are very attractive, but they tend to scratch and peel easily. Unfortunately, it is almost impossible to find tips to solve this problem, including finding information on how to remove the black coating completely.

Fortunately, you can easily remove black stainless steel coating with acetone. Acetone removes the coating without damaging the stainless steel during the coating, but you still need to clean the appliance afterwards to remove any lingering streaks.

To learn how to properly and safely remove black stainless steel coating using acetone, keep reading. This article fully explains how acetone can help you get the job done, as well as what you need to do to get your appliances in tip-top condition again.

How to remove black stainless steel coating in 4 steps

The easiest way to remove the black stainless steel coating from your kitchen appliances or other items in your home is to simply use acetone. Acetone is the main ingredient in nail polish and it is mostly used to remove acrylic paint among other coatings.

Get your supplies

The first thing you need to do is get your supplies ready. The most important thing you need to remove the coating is acetone. If you just remove a little bit of coating, the use of nail polish should work fine. However, if you are removing the coating from a larger appliance or other large surface, buy a whole jug of acetone instead to make sure you have enough to complete the task.

In addition, you should use cloths, gloves and a face mask so that you can remove the coating using the acetone while keeping yourself safe. (It is bad at removing moisture from the skin and the fumes can cause irritation to your eyes and airways.) Finally, use some basic cleansers for the final step of simply cleaning the streaks that are left behind.

Here is a list of everything you need:

q? encoding=UTF8&ASIN=B07TLZDSWR&Format= SL250 &ID=AsinImage&MarketPlace=US&ServiceVersion=20070822&WS=1&tag=homelizationg 20&language=en US

Prepare your item and protect yourself

Once you have all your supplies, prepare the item from which you intend to remove the coating. If it is a small glass or other stainless steel object, simply grab it and place it in a protected area, such as outdoors to avoid the acetone fumes and on a surface that you can easily work on and do not mind to get dirty or damaged. If you are removing the coating from a large kitchen appliance, remove the plug from the appliance and pull it out into the open so that you have access to all sides.

Because acetone is so dangerous to your skin and respiratory system, it is important that you also protect yourself with appropriate protective equipment. To prepare for the process, put on your gloves and face mask and wear protective equipment at all times while working with the acetone.

Remove coating with acetone

Now that your item is in a suitable area with decent ventilation and you are wearing your protective gear, you can remove the black stainless steel coating from your item or appliance with your acetone.

Do not press very hard while rubbing on the coating during removal. The acetone must be strong enough to corrode the black coating, while the cloth helps to lift the residue of the coating out of the appliance.

Simply rub and scrub the coating away with the acetone-soaked cloth until the coating is completely removed and you are ready to clean.

Clean stainless steel

After the black stainless steel coating has been completely removed, there will likely be streaks on the appliance. This is perfectly normal and does not mean that the stainless steel has been damaged.

Instead, these are just streaks across the top of the stainless steel due to the coating and acetone leaving residue after removal. By cleaning these surfaces, you can remove the streaks and make your appliance look clean and new again.

To clean your stainless steel appliance, take your white vinegar and a microfiber cloth. Spray the white vinegar on the appliance and dry it completely. After the white vinegar is applied, check for streaks left. If so, repeat this step again as needed.

Once all the streaks have been removed, dip your microfiber cloth in just a little bit of olive oil and rub it in circles against the stainless steel. The olive oil will make the appliance look super shiny. However, be careful not to use too much oil and cause clutter.

For those who prefer less natural methods of cleaning their appliances and do not mind harsh chemicals, there are also many products available online and in stores that are designed specifically for cleaning and polishing stainless steel appliances and provide the best possible streak-free results. .

Is acetone safe for stainless steel?

Acetone is a rather hard and intense chemical, but it is definitely for stainless steel. It does not corrode the steel material at all, but it will completely remove the unwanted coating. It successfully removes the black stainless steel coating that you want removed without damaging the stainless steel underneath.

Related questions

How do you fill in scratches on the surface of a black stainless steel appliance?

If your black stainless steel appliance just has some scratches, you do not need to remove the black coating completely. Instead, you can just use a permanent marker to fill in the scratches. Although the permanent marker can still be seen up close, it will at least mask the scratches from a distance without any problems.

How much does it cost to replace the panels on a black stainless steel appliance?

Instead of filling in the scratches or removing the coating completely, you can also replace the panels on your stainless steel appliance. However, you can expect this to cost anywhere from $ 100 to $ 400.

Should I get black stainless steel?

Black stainless steel looks very modern and attractive, making it a great choice for those who care about the aesthetics of their home. In addition, black stainless steel also does not show stains and fingerprints as easily as regular stainless steel.

However, the coating on these attractive appliances is incredibly easy to scratch and damage, nor is it very difficult for it to peel away. If you have children, long nails or pets, it is often best to go with traditional stainless steel instead.

Also see:
How to clean Ikea fabric boxes
How is lysol odor neutralized? Read this first!
How to get cat pee out of a love bag
Is SodaStream worth it for sparkling water?

How Long Does It Take Carpet to Dry After Cleaning

Did professionals use hot water extraction to clean your carpets? Have you shampooed them yourself?

If you have newly cleaned carpets, wait before you can walk on them. Even if you use water heated to an extreme temperature, the fibers still take a while to dry.

Although there are many ways to clean carpets, most carpets will take 6 to 12 hours to dry. Cold air and moisture also affect the drying time.

But don’t worry! This guide will help you figure out how long to wait and give you some tips to speed up the process.

How long does it take for a rug to dry after professional carpet cleaning?

It depends on which method the professional carpet cleaners used. In general, the carpet drying time is between 2 and 12 hours.

Hot water extraction (“Steam cleaning”)

This type of carpet cleaner takes between 6 and 12 hours to dry. Unfortunately, this drying process is very long because it uses water.

Many people call this method “steam cleaning”, but it is a wrong name. Although it does not use steam, it does use hot water.

To clean in this way, professionals use a high pressure machine to spray water and detergents into the carpet fibers. At the same time, the appliance vacuums the wet carpet to soak up residues of liquid and dirt.

The combination of the hot water and cleaning agents loosens the dirt so that the vacuum cleaner can remove it from the carpet. However, because a lot of liquid is used, this method takes longer to dry than others.

Bonnet cleaning

Carpet cleaner with brush encapsulation machine

This dry cleaning system only takes approx 2 hours to dry because it uses so little water.

Instead, a professional carpet cleaner will add a chemical agent to the fibers and use a spinning hood to work the chemical into the carpet and encapsulate the dirt.

The bonnet will also absorb some of the dirt, but the person skilled in the art can vacuum the carpet to completely remove the chemical.

In addition, some professionals say that this method only cleans the surface of the carpet instead of cleaning all the fibers in depth. Hence the fast drying time.

Shampoo cleaning

Wash the rug

This method falls between the other two, with a drying process that takes approx 4 hours.

When you get your carpets cleaned professionally with this method, the cleaner will follow the same process as bonnet cleaning. But instead of a bonnet, they use a brush.

In this cleaning style, you also need to use more liquid chemicals, so it will take longer to have a dry carpet.

How long does it take for a rug to dry after home cleaning?

In general, it takes less time to dry your carpet after cleaning this way: only 2 to 4 hours. However, it depends on which cleaning method you use.

Steam cleaning

steam cleaner on the carpet

To get steam-cleaned rugs at home, you can use an appliance like this McCulloch steamer.

Steam cleaning does not use much water to produce steam, but it does use a lot. Therefore, you can have a damp blanket afterwards.

If so, do not despair! With this cleaning method, your carpet dries in about 1 to 3 hours.

Carpet shampoos

Carpet washing with vacuum cleaner

For this type of cleaning, you can use a device like this Bissell to shampoo your carpets, rugs and upholstery.

To have a dry rug, wait approx 2 to 4 hours after shampooing.

Other factors affecting carpet drying times

Whether you hire a carpet cleaning company or do-it-yourself, other factors affect the drying time.

1. Weather

The weather is one of the biggest considerations when it comes to getting a dry blanket.

In summer, you can open your windows, allowing for more air circulation. This in turn makes the rug dry faster.

However, if it is rainy, humid or cold, you can not open your windows. In addition, the excess water in the carpet will not evaporate as quickly under these conditions.

So if you want to easily dry your wet blankets, do not clean them on cold, rainy days. Instead, try cleaning them on warm, sunny.

2. The ventilation

Good airflow will make a rug dry faster. So if you can open some windows for fresh air or turn on a ceiling fan, the moving air will help the moisture to evaporate and dry your carpet.

3. Carpet size and thickness

A large rug will take much longer to clean than a smaller one because there is just more moisture that needs to evaporate. In addition, a thick blanket will be able to hold on to more moisture, so it also takes longer to dry.

Thick carpets can be comfortable to walk on, but it will take a while to dry out completely. On the other hand, a small, thin blanket will dry much faster.

4. Carpet materials

Carpets can be made from many different materials, including both natural and synthetic fibers.

Synthetic fibers, such as nylon or polypropylene, will dry relatively quickly. However, rugs made from natural fibers, such as cotton or wool, will take longer to dry.


If you still have questions about drying your rug after cleaning, read on!


How can I get my rug to dry faster after cleaning?

Several drying methods can speed up the process after you have cleaned your carpets. For example, you can use fans, air conditioning or a dehumidifier.

And if your rug is just slightly damp, you can even dry it with a hair dryer.

In general, anything that moves air will be useful. So ceiling fans or floor fans can help dry the carpet.

However, they will not remove moisture. For this you should use a dehumidifier or air conditioner as these remove moisture.

Also take into account the humidity outside.

If it is a day of low humidity, you can open the windows to help dry the carpet. But if it’s damp outside, keep your windows closed.


How long should you stay off the carpet after cleaning?

Usually do not walk on a wet rug. If it’s just a damp blanket, you can walk gently wearing clean shoes or boots.

However, it is a good idea to wait a full 24 hours for the rug to be completely dry before going on it.

You should also not touch damp carpet.

Since a carpet cleaning technician uses lots of chemicals for carpet cleaning, you do not want them to come in contact with your skin. You may even get an allergic reaction to the cleaning chemicals.

So do not walk on damp carpet with bare feet.

And if you clean your carpets yourself, be sure to follow all the instructions on the chemical bottle and machine carefully.

How to use Baking Soda as a Carpet Cleaner complete Solved!

How to use Baking Soda as a Carpet Cleaner complete Solved!

Using Baking soda as a carpet cleaner is not a wise idea. Cleaning up a spill on your new carpet may seem like a quick fix, but it’s a surefire way to get more work done for yourself.

Even if you try to vacuum it up, baking soda hangs in a soft blanket and causes more damage the longer it is there. This can lead to damaged backing, which is a much bigger task to fix!

Before we move on, let’s learn a little more about baking soda and what it does to your rug. And why not use it!

Properties of baking powder

How to use Baking Soda as a Carpet Cleaner complete Solved!

You tend to use baking soda when you, yes, bake! Its technical name is sodium bicarbonate, and this white powder is a leavening agent that helps cakes and bread leaven (1).

But when it comes to cleaning with baking soda, it is ideal for things like pet odors as it is alkaline. This means that it neutralizes bad odors caused by acids.

And since it loves water, you can mix baking soda into a convenient cleaning product. The crystals in baking powder create an abrasive texture that is ideal for scrubbing away greasy stains.

You can make a scouring paste with baking soda that removes stubborn stains by creating friction. But you should stick to hard surfaces, such as kitchen countertops, tiles and tubs.

You can also use a mixture of baking soda and vinegar to clean your oven or clog drains. This inexpensive solution creates carbon dioxide bubbles so that it foams up and cleans as it goes.

So baking soda has lots of uses in your home, but carpet cleaner is not one of them! You should stick to using it on hard surfaces.

Let’s find out why.

Reasons to avoid using baking soda as a carpet cleaner

Let’s take a closer look at why you should not use baking soda on carpet stains.

1. It is not effective in removing stains from a rug

Despite what you read online, baking soda is not effective at cleaning carpet stains.

But why?

First of all, it is abrasive. So that means it works best on hard surfaces.

The friction caused by the crystals in baking powder works wonders with food and grease stains on your countertop, but not your rug. Instead, use a solvent to remove dried food from the rug.

Here’s the best way to do it:

  • Use a spray bottle or cloth to apply enough of the product to make the stain slightly damp
  • Dab the stain with a paper towel
  • Rinse the area with warm water
  • Let it dry


You should never rub on hard carpet stains as it makes the stained area larger and harder to clean. And it’s even worse if you try to use baking soda, as this penetrates deeper into your rug and its abrasive nature makes the dunts get twisted.

You may have also heard of using baking soda as a dry compound to soak up spills and stains. It works well for this as it absorbs moisture but only on hard surfaces!


You do not want to use baking soda as a dry compound on rugs. The tiny particles stay in the fibers and cause damage over time.

The same goes for removing pet odors or using baking soda as an odor remover in general. It is ingenious to remove odors on hard surfaces, but it can cause the following problems if used for carpet stains.

2. It can damage the fibers of your rug

All this comes back to the abrasive nature of the baking powder and how gritty it is. When you mix it with water, it forms a solution that sticks to your carpet fibers.

So every time you walk across the carpet, rub the grainy baking powder against the fibers and scratch them.

Over time, this will damage the fibers and cause your rug to lose its luster. The baking soda particles can even change the color of your rug!

It is not so noticeable if you use a small amount of baking soda every now and then, but too much baking soda is a disaster. This will end up shortening the life of your rug and it is expensive to replace it too often.

It is much better to use a different carpet cleaner instead of changing the carpet more often than you need to.

3. It leaves a white film over your rug

It may sound like something that is easy to fix, but it is not. A white film caused by baking soda is difficult to sort out and may lead to the need for professional help.

But how does it happen?

When you sprinkle dry baking powder on your rug and add water for cleaning, the baking powder dissolves and you cannot see it. But as the water dries from the carpet, baking soda particles dry out and are left behind.

This causes a white film that only gets worse the more you walk on it. So you get a clear color change, or traffic lane graying, in areas with high inflow.

It makes a fresh rug look old and worn when in fact it is only baking soda trapped in the fibers.

Can you vacuum it?

In short, no.

Since some of the baking soda particles are so small, vacuuming will not remove them all. Cleaning experts have tested the theory and shown that about 65% are cleared away while the rest remain on your carpet.

You can try an acid rinse to remove the underlying residue, but this tends to need professional help. White lanes are something you never get completely clean on your own!

You can see here what damage baking soda did to this sofa. The stain of the white film is clearly visible.

White residue on fabric

4. It breaks down the back of your rug

If you use baking soda as a carpet cleaner, some of the tiny particles work into the fibers and stay there. And since you can not vacuum it all out, it is very difficult to try to remove it.

Do not let baking powder sit for several hours. Leaving baking soda on your rug overnight, or longer, causes more damage.

The particles continue to move down through the layers until they come under the carpet and are padded to the floor below. And then you have no chance to pick them up!

Over time, the latex adhesive in the back of the rug is degraded by baking soda when mixed with moisture. This means that the back does not hold the carpet to the floor as it should.

In the worst case, this results in delamination. You will see wrinkles and lumps on the rug that you can not smooth out or push down.

But it can lead to you having to replace the entire rug, which is something you want to avoid! It is an expensive end to trying to clean a stain.

5. It changes the color of natural rugs

Thanks to its alkaline nature, baking soda can change the color of your rugs.

If you have multicolored rugs or rugs with patterns, baking soda makes the dyes and pigments soften. So it ruins the design and you lose the sharp colors.

But what about natural rugs?

These are not safe either! They may end up turning yellow if you choose baking soda to remove stains.

Carpet cleaners with a high pH, ​​such as baking soda, cause something known as cellulose tanning. This leaves yellow or brown stains that are difficult to remove on carpets made from natural fibers.

If this happens, try applying an acid rinse to reverse the discoloration. But it is best to get professional help for this instead of trying a white vinegar mixture.

So as well as white lanes, you could end up with ugly yellow spots. Another reason to leave baking soda standing and treat hard stains with something else!

6. This prevents the carpet from being cleaned

If you keep using baking soda (or other high pH cleaners) to clean your carpets, leave a sticky residue. This attracts more dirt, leaving your carpet with a bigger greasy stain than you started with.

And it makes your rug even harder to clean!

Sticky dirt is one of the hardest stains to remove, so this in itself is a great reason to avoid using baking soda to clean carpets. But it will be worse.

You may end up changing the pH of your actual rug and making it as high as the remnants of baking soda left. If this happens, it limits how much dirt is released when you clean your carpets.

This means that you will find it much harder to clean your carpet and remove stains in the future.

So when it comes to carpet cleaning, baking powder rather makes things worse than better.

7. It damages the plastic parts of your vacuum cleaner

Whizzing your vacuum cleaner around to try to remove all baking soda on the floor is another thing to avoid. Yes, it is quick and easy, but it also causes damage.

Some particles of baking soda are so small that they clog the filter on the vacuum cleaner. And if your model uses dust bags, baking soda can also throw them away.

Clogged bags and filters mean reduced suction power and less efficient cleaning. And you are also more likely to suffer from lumps in your vacuum.

If this was not annoying enough, there is also a chance that the small dust particles will escape from the filtration system. If this happens, there is a risk that the vacuum motor will be damaged and short-circuited.

Finally, the plastic parts inside your carpet vacuum cleaner are also exposed to damage from the abrasive crystals in baking powder. Especially if you clean up a generous amount of things.

So all in all, vacuum cleaners and baking soda are not a good mix! Save yourself a ton of effort, and try using another method to get rid of that stain.

Alternatives to baking soda for cleaning your rug

There are so many different ways to get a stain out of your rug without using baking soda. Whether it is removing non-greasy stains or any dog ​​blood for pet owners, there is a method that suits everyone.

To learn how to clean carpets with baking soda alternatives, check out our handy guides for these particular types of stains:

Or find out how to get rid of the harsh chemicals with some amazing homemade carpet cleaners, such as dish soap or white vinegar. You can still enjoy clean rugs, but with all-natural ingredients!

Otherwise, this list of tips for cleaning your carpet will be useful for the entire carpet or stain cleaning.

Whatever you do, do not use baking soda as an deodorant or for carpet cleaning. Use one of these solutions and keep your rugs fresher for longer!

deck joist spacing Proper Build complete guide for you

deck joist spacing Proper Build complete guide for you

you want want to complete build deck joist spacing. Building a tire as a do-it-yourself project is an exciting way to become familiar with your tools and equipment while having something useful to show for it.

Apart from the building material, however, the most important part of any deck construction is the framing.

You need to have appropriate spaces for your joists, beams, supports and railings.

There are several factors that come into play at the correct distance, and reasons to switch from one to the other.

This article will cover the best options for deck beam spacing and help you understand why they should be placed where they are. Read on to learn everything you need to know about beam spacing.

The important deck joist spacing building distance measurements

When building a tire, there are many goals to be made and double checked. The most important are listed here:

  • Overall size. You need to know how big your finished tire will be. This affects permits and materials.
  • Post distance. The main posts have detailed and specialized distance requirements for the basic structure of your new deck.
  • Radiation distance. Some tires only have edging beams and others need support beams in the middle. These measurements will prevent a fall in your tire.
  • Beam spacing. The joists hold the deck boards and have the most varying requirements for distance.

Local building regulations

local building regulations

When doing any kind of renovation or construction on your home, it is important to know the building codes for your city. Below we outline some of the key factors in building codes and what they mean to you.

Span requirements

The composition of each city, state and region is different. Temperatures, soil and other factors are included in the calculation of local span requirements. City Codes help your tire maximize support to prevent falls and collapses regardless of conditions.

Need for railings

In most areas, any deck or porch with more than two or three steps will require a railing. When planning the layout of your deck and framing, consider both the steps and the railing. The styles and materials used are usually up to you, but their placement and attachment to the frame and joists is important.

Posts and Anchors

When hitting your deck, the joists and beams must be anchored. The posts and anchors may be required to have a certain depth, a certain distance from each other or use a certain fastening system. Make sure everything is in accordance with the building regulations and you will be in order.

Frost lines

In colder climates with snow, runoff and freezing soil temperatures there will be a frost line. Some regions require that the foot pieces of the tire extend beyond the freezing line so that the tire does not rise during a freeze. Other regions may allow a floating deck system that rises and falls with temperature.

Requirements for attached tires

If your deck is attached to the house, you will need a ledger. Building codes in these cases will be explicit about how many fasteners, what type and their distance to use. Although you may or may not be forced to use metal cladding, regardless of the material, be sure to comply.

Cover foot, posts and railings

When dealing with substrates, you must comply with building regulations. Colder climates will have a frost line that needs to be taken into account. Warmer climates may have more shallow footing.

The size of the foot and the posts will also be determined by the type of foundation (sand, clay, etc.) and the height of the deck. In most cases, for example, 4 × 4 timber is the standard. For tires more than 6 feet off the ground, a 6 × 6 post and frame may be required.

Calculation of deck beam span

The beams are often confused with the joists, so let’s get it cleared up a bit. The short, easy explanation is that a beam is a larger support board that carries the load, distributes the weight and moves the load from floors, walls or roofs to the columns.

On a deck, these are the main sections of the frame that connect joists and deck boards to the foot and posts. The beam boards can be a single board or two put together.

The general recommendation is to use two boards as they help distribute the weight and are generally stronger than a single board. Use two 2 × 8 plates instead of a single 4 × 8, for example.

The board type will also be a factor in the beam distance. Southern Pine and Gran have a different beam distance than Cedar and Red Pine. Smaller tires can also get away with beams around the edge that distribute the weight to the foot and posts. However, larger tires may require more beams in the middle part of the tire.

As a general rule, the beams should span the entire width of the deck. However, their distance depends on the depth of the plates. The board depth in inches is the space in feet it can span.

For example, if you have a 2 × 8 inch beam, it may span 8 feet before another beam is required. A 2 × 12 inch beam can span 12 feet.

However, it is also important to know that the span of the joists that the beam supports also determines the amount (in feet) that a beam can span between the support. The greater the beam spacing, the shorter the beam spacing.

So as an example, a 2 × 10 beam support beam that spans 8 feet will need support beams every 9 feet, but a 10-foot beam spacing can only span 6 feet without a support.

Calculation of deck beam span

calculation of deck beam span

The beam spacing is not as important with the weight distribution as the beam spacing, but it is important for placement and deck finish. The joists are the boards you want to place your terrace on as well as your barbecue, chairs and lighting.

The biggest factor here is the sheet material. Treated timber is still the most common, but composite and PVC are appearing more in new construction than in previous years.

When dealing with composite beams (see below) you will receive explicit instructions when placing your order. Each brand will have their own requirements. Your only task, apart from following these instructions, is to make sure that you also stay within the code compliance.

For timber, however, it will depend on the type of wood you use and the size of the boards. To make it clearer, we have a chart with the most common woods and dimensions based on 16-inch beam spacing.

2 × 6 2 × 8 2 × 10 2 × 12
Sydfyr 9 feet 11 feet 10 inches 14 feet 16 feet 6 inches
gran 8 feet 4 inches 11 feet 13 feet 7 inches 15 feet 10 inches
Redwood, Cedar, Red Pine 8 feet 10 feet 6 inches 13 feet 15 feet

Trex beam spacing

The distance to the joists is generally 16 inches from the center to the center. That means you measure the board from its center 16 inches. That mark is where the center of the next bar will be. You do not measure end to end or edge to edge.

Trex as one of the leaders in the composite terrace are also good composite boards for joists and beams. Almost each of the Trex options will require a 16 in OC (center) beam spacing.

The other option you will find from Trex is 12 or 14 inch OC when using angled or picture frame applications.

Composite deck beam spacing

Other composite brands also tend to follow the standard 16-inch OC beam spacing. It will also depend on the brand, the type of composite and the conditions in which you place them. Some composite materials, such as Deckorators, are classified for water or ground installation. This means that you can use larger spaces as long as it is within the code.

Tire beam distance to 5/4 tires

When using a 5/4 patio table (1-inch thick patio table), the beam spacing should be a maximum of 16 inches OC. It is not uncommon to find 5/4 straws placed at 12 inches.

A 12-inch OC beam spacing is also used in commercial patios where 5/4 joists are more common. You will also find it in residential areas where you have a larger tire and want a more rigid feeling under your feet.

Frequently asked questions about deck beam spacing

faq deck beam spacing

In this section, we will answer the most common question about deck beam spacing. If you have more questions, please use the comment box below.

Q. How many joists do I need for a 12 x 12 tire?

  1. The actual number will depend on the beam width and the beam material. However, you calculate how many straws you will need. A 12-foot deck is 144 inches long, and with a 1-inch table 16 inches apart (in the middle), you’ll need 10 joists.

Q. Can I use 2 × 4 for my patio frame?

  1. Unfortunately, 2 × 4s are not strong enough to carry the weight of a patio frame, and will require more bracing and extra layers to make it work. It would be much more possible and less work to use standard frame sizes (2 × 6, 2 × 8, etc.) for your beams and joists.

Q. Do I need a building permit for my tire?

  1. In most areas of the US cities, what is called the 30-inch rule follows. If your deck is less than 30 inches from the ground (to the top), it is considered a porch or patio and generally does not require a permit. However, you should always check with the town hall and the building inspection department to make sure before you start construction.

Q. What is the maximum distance between deck posts?

  1. Regardless of the footrest, beam and beam spacing and material, the maximum post spacing should not exceed 8 feet.


Distance between deck beams is one of the most crucial and important measurements for your building. If you build your tire as a do-it-yourself project, the beam spacing will determine how strong your tire surface is, whether there will be deflection in the future, and how stiff the tire will be.

While the general guide is 16-inches in the middle of the beam spacing, the actual measurement will depend on the tire size, beam material, and location.

Now that you know how to position your beams and joists, you are one step closer to completing your new deck project.

Deck Skirting Ideas: Best and accurate Options for 2022

Deck Skirting Ideas: Best and accurate Options for 2022

 now you learn about Deck Skirting Ideas. Your deck is built, the steps and railings look great, and your grill smokes as the sun begins to set.

It sounds good, but now you have to finish the project.

Wrapping the tire to hide the gaping hole underneath requires skirting boards.

Baseboards come in many shapes and offer aesthetics, beauty and even functionality.

Which materials and which baseboard method is right for you?

In this article we will look at the important factors considering foot panels and give you some creative and functional plank lists. Read on to find out how to finish your patio project the right way.

Most common tire skirting boards

Cover strips come in all shapes and sizes. Some options are more popular than others, either because of their appearance, ease of installation or low maintenance. Let’s take a look at the most popular options.

  • Grid. PVC, wood or plastic grilles are affordable, easy to install and easy to care for. It is common and does not impair the appearance of the home or patio.
  • Composite patio table. Using the remaining deck boards for skirting boards means that your entire deck matches and has the same general maintenance levels.
  • Natural materials. From shrubs to rocks, you can let nature be your footing.
  • Fencing. If you have a fence left over from your backyard project, it can be easily converted to deck skirting boards.
  • Open. Exposed beams are popular inside and outside the home. Leaving the tire open without skirting boards is the easiest and lowest maintenance option available.

Buyer’s Guide: Consideration Factors for Cover Lists

Deck Skirting Ideas

Before you go and buy some garden lattice and attach it to your deck, let’s take several factors into consideration. The following considerations should help you get the right materials with the best idea for project completion.

Project size

The size of your deck and the amount of open space underneath will determine the best foot panel material for your needs. It will also dictate how much material (and therefore cost) is required.

Measuring in both square feet and linear feet will also help buy material faster and easier. These numbers are important for the whole project and it does not end when the main deck is finished.

Material Type

When it comes to the foot panel, you have plenty of options for materials. From the same material as your patio table (composite, timber) to aluminum, lattice and even natural materials. The cost, amount of purchase and even care and maintenance all need to be considered and will all vary based on the material you choose.

Installation method

Baseboards are generally offered by the contractor who installs your tire. But since it is not a structural design, you can save some money by skipping your own tire as a do-it-yourself option. The time and money saving is your decision, but must be considered before you start tire construction.


The empty space under your deck can be used for storage or just closed off and forgotten. Many homeowners take advantage of the space for barbecuing or storing lawn care equipment, and others just wall it off for a more solid look. However, if you need the space or functionality, proper planning is crucial for material purchase and installation.


Most materials used for baseboards will not have a warranty, although it can be covered when purchased as part of a patio package. When buying your skirting boards, be sure to understand if there is a warranty and what it covers.

Most foot panels are quite durable and low maintenance, so if there is no warranty, you will not be out of pocket too much. However, if your warranty is part of the main deck project, make sure that everything complies with the construction so that you do not cancel this cover.


Options for foot panel material range in price from free to over $ 20 per foot. square feet. The type and how much you spend depends on all the above factors plus your needs and desires.

When planning your tire construction and baseboard in particular, your budget is important. Make sure you plan additional materials and also plan the first or two years of care and maintenance costs.

Ideas for cheap cover lists

cheap cover lists

There are popular baseboards and there are cheap baseboards. As it stands, there are also popular and inexpensive baseboards. Saving money is just as important for some homeowners and looks good.

Of course, lattice is the most popular option. It is a clean and classic look, and lattice panels are relatively inexpensive. You can also get wood, composite, PVC or even aluminum lattice. Colors, strength and low levels of maintenance keep the grille popular, and with so many options, the cost remains low.

Grids, however, are not the only inexpensive option, and natural materials are a good baseboard option.

Natural materials

When clearing the ground to build the deck as well as what is already lying around, many homeowners can recycle rocks and stones to make a foot panel option. You can also buy stones and bricks to build a low maintenance option, but depending on the size and quantity, the cost can be high.

Another concern with using natural stone, rocks or bricks is the coverage area. For swollen tires that are over 36 inches from the ground, use a lot of material. It is also difficult to cover the space fully, so you also need to worry about the wildlife getting under the deck.

Shrubs and Plants

Another natural and inexpensive option is to use foliage. Using the space around your deck as a garden with tall flowers, shrubs and shrubs will not only add amazing scents and aesthetics, but it can also be functional.

Planting a food garden can provide double duty by blocking the view of the empty space under the deck while supplying you with fruits, vegetables or spices. The disadvantage of using trees, shrubs or shrubs is that the level of maintenance is higher.

Not only do you have to care for the plants so that they stay alive and thrive, but extra care is needed to keep the shrubs free of dead leaves and high aesthetics. In winter, it will also open up the space and make the underside more visible.

Horizontal cover strip

Horizontal lines are one of the most popular ideas without grids. Using patio boards, you can run horizontal lines that match the rest of the deck. You can also use metal, wood or composite here and use a lapping or beach-style / large gap style.

As long as the boards are connected to the bottom and not the ground directly, you do not have to worry about moisture transport or early rot. As long as you leave some space between your horizontal table placement, you do not have to worry about ventilation.

Modern baseboards

Modern designs use PVC, aluminum, metal and other non-conventional materials. Although the cost can be high at a rapid pace, the service life of the material is among the best. You can also incorporate different styles, paints and sealants to create intricate designs or patterns.

Sheet metal is easy to cut and shape, is inexpensive and adheres quickly. It gives a nice industrial look to the tire, but it can easily collide with most designs.

If you use metal, be sure to get something that is corrosion and rust resistant. Galvanized steel is a little more expensive, but will withstand the elements much longer.

Trex and composite skirting boards

Trex is a brand that offers more patio parts than almost any other. Their line-up includes clothing, lighting and even games. It is common to use the composite material for baseboards and can be included in your material purchase amount.

Composite offers the same durability, easy installation and low maintenance levels. The freedom of using the same brand of foot panels as your patio means that fasteners, colors and styles also fit together.

With composite, you can also create horizontal, vertical or patterned baseboards, giving you more options for design and aesthetics.

How to maintain cover lists

Maintaining your cover foot should be simple, infrequent and quick. You do not want to spend time cleaning and maintaining a foot panel that only takes away from enjoying your tire for its primary purpose.

Cleaning is the most important aspect. Depending on your material type, this may be a simple spray with a garden hose or require scrubbing. Shrubs or leaves need watering, but you do not have to worry about dirt or grime.

For stone, composite or metal, a garden hose can spray down when dirt and grime accumulates, otherwise you do not have to worry too much about it. For timber and other materials, you may need to use a high-pressure cleaner to prevent algae and mold from growing.

Other maintenance issues will also depend on the material in your baseboard. Wood needs to be treated, sealed or painted when it’s time to treat your tire. This can be annual, which raises the level of maintenance.

The key components for longevity and extended aesthetics are quite simple. Keep the foot panel clean and in good condition. If you need to paint, seal or treat, do it. Keep mold, mildew or algae growth to a minimum and for natural materials keep them trimmed and free of dead leaves.

Frequently asked questions

faq ideas for cover lists

In this section, we will answer the most common questions about floor molding ideas. If you have any other questions, feel free to use the comment box below the article.

Sp. Do I need access under the deck if I do not plan to use the storage space?

  1. It is always wise to have an access panel or doorway to get under the deck when needed. Even if you do not plan to store anything under the deck, there will be times when you need to get downstairs, either for maintenance and repairs or to rescue an animal or even access water or electrical wiring. Having an access point makes the process even easier.

Sp. Do I need to leave space between the patio boards?

  1. The deck itself as well as baseboards need space between the boards. This helps with air circulation and ventilation as well as drainage. It also allows expansion and contraction during temperature fluctuations to prevent cracking or damage.

Q. Do I need tire skirting boards?

  1. No. Skirting boards are a personal choice and aesthetic assistant. Many raised tires use the open space under the tire for other purposes, and it may also be an appearance choice not to have baseboards.


Deck foot panels are one of the aspects that allow you to express your creativity or adventurous side. For not much money you can try new things to add to the look of your tire, change the overall look or just stand out in the neighborhood.

Whether you choose composite, lattice or shrubbery, there are options. You can paint, build or let nature take over and there is no wrong answer. If you stick to regular skirting boards or venture out into the new and unknown, your deck skirt should show your style, personality and panache.

How to Get Cat Pee out of a Lovesac – all best home

How to Get Cat Pee out of a Lovesac – all best home

How to Get Cat Pee out of a Lovesac – all best home

We all love having comfortable furniture in our homes, especially something as luxurious as Lovesac sofas. For some of us, we also enjoy sharing our homes with furry family members. Occasionally these two worlds collide, and or beloved pets will have accidents on our beds, floors or even sofas; and it is here that cleanup can become difficult or even impossible in some cases.

Unfortunately, there is no real way to get cat pee out of a Lovesac. You can, of course, machine wash the cover to remove any odors or stains, but you can absolutely do nothing about the foam.

Even if you wash your Lovesac by hand, the ammonia particles in the cat’s urine will always remain. Even though you may not smell it, your cat will eventually want it and they are likely to urinate on it again.

If you have a Lovesac, you are one of the millions of people who are blessed with one of the most comfortable pieces of furniture available. It’s basically a beanbag chair, but it does not consist of the usual little beads and beans found inside most similar products. Durafoam is Lovesac’s proprietary filling for their chairs and sofas; and, not surprisingly, it is not a material designed to withstand being a substitute for our pets.

Quick overview

  1. Estimate how much urine is soaked in the Lovesac. It is likely that you will have to throw out the inner foam.
  2. Clean and machine washable cover; you can treat it with stain spray and let it air dry when done.
  3. Some recommendations from Lovesac along with stories and experiences from owners.
  4. Prevent your cat from having another accident by covering it, keeping it out of sight or training your cat.

Evaluate the urine

If there is only a little urine on the Lovesac, it may be okay to just throw the cover in the washing machine. Spray some deodorant cleanser on the affected area of ​​Durafoam afterwards. But if there is a lot of urine, you will simply have to throw Durafoam away – you will not be able to save it.

Cleaning the lid

According to Lovesac, you can wash the cover on a gentle cycle in the washing machine with cold water. Make sure you use detergent that is specifically designed for delicate delicate items. You can also use some rinse aid to help with the smell if you feel like it.

In addition, you can pre-treat the fabric with an stain-removing product or baking soda and vinegar. When done, let it hang dry. Do does not put it in a dryer.

What Lovesac recommends

Lovesac says they should follow their drug care guidelines, but there is no information available on their website about such a thing. However, in the Lovesac FAQ section, they do not recommend washing their product as much as possible. Try to treat spills and stains with a damp sponge or cloth and a vacuum. Use your washing machine as a last resort to clean these up.

Ownership stories and experiences

When you browse online help forums on removing cat urine from a Lovesac, it’s a nightmare. This is because the foam on the inside absorbs, traps and retains the smell of cat ice. Once it’s there, it’s there forever.

For those who jumped with the gun and tried to wash the foam, it scattered the cat’s urine throughout the foam and destroyed the material. In addition, any success they achieved was quickly mitigated when the cat returned to the piece to pee on it again.

How to prevent a cat from urinating on your Lovesac


Once you have a Lovesac, it is imperative to implement preventative measures. The chances that you will be able to remove cat pee once it is there will be next to impossible.

Cover it or move it out of sight

As a good step towards protecting your belongings, you can always use some kind of waterproof coating over your Lovesac. This way, if your cat pees on it, the urine will simply run off the furniture. However, this will still create clutter on the floor – however, it is usually much easier to clean than Durafoam.

Of course, it is also possible to put a rubber or silicone mat under your Lovesac. This will protect the floor and it is easy to keep clean and remove cat urine when it shows up.

If it’s too much or too involved for your liking, you can also just keep your Lovesac up and out of the way when not in use. This would clearly be far more effective for the smaller beanbag chairs than it would be for larger sofas and sections.

In the case of the larger types of Lovesac furniture, it is best to cover them.


The approach of benefits that even extends beyond just protecting your furniture, you can always try to train your cat not to pee on Lovesac (nor anything else of value in your home). There are several techniques you can try in an attempt to prevent your cat from urinating on it. You may need to use a combination of the suggestions below, so be sure to devise an action plan before starting your actual training program.

  • Make it unwanted – Cats are very sensitive to smells, they find both rough and loud noises. You can place a cover on your Lovesac that has a crazy, loud, crunchy sound. You can also spray something like lavender essential oil all over Lovesac – cats hate lavender and other strong perfumes.
  • Use a spray bottle of water – Very few cats actually like water. With a toy water gun or a spray bottle that has a long stream and covers a good distance, you can simply spray your cat every time you notice that it is even trying to approach Lovesac.
  • Keep it away from all cat areas – Make sure your Lovesac does not stay near your cat’s food bowls or litter trays – this includes the areas where they sleep, relax, play and hang out. The most important thing here is to reduce your cat’s desire and curiosity.
How to Neutralize Lysol Odor? Read This First!

How to Neutralize Lysol Odor? all best home

How to Neutralize Lysol Odor? Read This First!

Do you know How to Neutralize Lysol Odor? Sometimes after using a lot of Lysol, there is a strong chemical odor left that infiltrates the entire area. Depending on where it was sprayed, it may also appear to stick to surfaces long after it was originally sprayed or used to wipe an area off. If you or someone else sprayed far more than necessary into your car’s vents or managed to soak your living room carpet, the intense chemical odor can give a feeling of nausea or even headaches.

Using vinegar or baking soda are two of the best ways to neutralize the strong odor of Lysol. If the smell of vinegar is annoying, you can add a little bit of an essential oil like lemon, orange, grapefruit, rosemary, peppermint or cinnamon. Baking soda, however, is well known for its ability to neutralize odors in any environment, which is why many people even store an open container in their refrigerator to keep their kitchen scents fresh.

Quick guide about How to Neutralize Lysol Odor?

  1. Use of white vinegar with essential oils
  2. How to mix white vinegar for use on different surfaces + Use of baking powder for fabrics
  3. Other things you can add to give it more deodorizing power
  4. What to do when all else fails

Use of white vinegar with essential oils

One of the best ways to neutralize the strong odor left by Lysol is with plain, white vinegar. You can mix it with your favorite essential oil, however lighter fragrant oils will not cover the Lysol scent as well as stronger. It is recommended to avoid using any of the slightly fragrant oils like rose, lavender, chamomile or night light. However, some of the following essential oils on the list work well mixed with vinegar to remove the odors you do not like:

  • Peppermint
  • Cinnamon
  • orange
  • Grapefruit
  • Lemon
  • Rosemary
  • Tea tree
  • Eucalyptus
  • Bergamot
  • Mandarin
  • Lemon
  • Clementine
  • Helichrysum
  • Sweet basil

How do you mix vinegar and essential oils to get rid of lysol odor on different surfaces?

Different surfaces will require different types of cleaning methods when it comes to your scented vinegar. In addition, the surface area will also be included in the equation.

If you are trying to get the smell of lysol away from your hands, fill a bowl with vinegar and add about 10 to 20 drops of essential oil. Mix well with your fingers and then let your hands rest in the mixture for a few minutes to pull. Remove your hands from the bowl and wash them with warm water and soap, wipe them off and smell them afterwards to check how effective your mixture was. If the lysol odor remains, repeat the process.

For hard, non-porous surfaces like those in your kitchen, you can simply spray the mixture of vinegar and essential oil on these surfaces and let it sit for a few minutes without drying. Wipe counters and other surfaces with an absorbent, dry cloth to clean everything, and you should notice a significant improvement in the reduction of Lysol odor. Repeat as many times as necessary as vinegar is such a safe cleaner and unlikely to damage any of the surfaces in your kitchen or bathroom.

Car valves and blankets

car vents

If you want to get the smell of Lysol out of something like the vents in your car, the rug in your living room or the fabric on your mattress, clean these using a spray bottle of vinegar. Add about 20 to 30 drops of your favorite essential oils, and shake well. You can even add some booze if you think it’s really bad.

For fabrics and soft surfaces, spray this mixture generously on the affected surface. If the problematic surface is in your car, turn on the car while the air conditioner is running, all vents open and the windows down. It is recommended to leave the vehicle like this for a longer period – anywhere from 20 to 45 minutes.

If this is your living room rug, open the windows and turn on a fan after spraying the mixture to help the air circulate and remove the odor, while the vinegar and essential oil mixture works magically.

In terms of using baking soda in these cases, it is not necessary to mix ingredients. You can simply sprinkle baking soda on your rug, rugs, the interior of your vehicle or other soft surfaces (including furniture) and let it sit for as long as possible. Take the time to do a few chores or make an important phone call, then use a vacuum to soak up excess powder on these substances. Afterwards, you should notice a significant improvement in how well the baking powder removed the Lysol scent (as well as other odors) from the soft surfaces of your home and vehicle.

Use the power of the sun

Can you add other things to vinegar to remove lysol odor?

You do not need to refer yourself to mixing vinegar exclusively with essential oils. There are a few other things you can add to your vinegar to help remove Lysol odors and improve the odor of your home, vehicle and belongings. Here are a few other options depending on your preferences as well as what you may have available in your home at the time of cleaning:

  • Alcohol (a tablespoon or two)
  • Borax
  • Water (this will dilute the strength of the vinegar)
  • Hydrosols (the water is left over after the preparation of essential oils for an extra scent)
  • Coconut oil (famous for getting rid of everything, add a teaspoon to ½ tbsp, but melt it first)
  • Espresso or strong coffee (coffee can eat away any odor; use one or two tablespoons of black coffee – no cream or sugar)
  • Lemon juice (squeeze fresh lemon into the vinegar)

However, be sure to always check reliable sources of information before mixing any household or cleaning ingredients to avoid significant hazards. Even mixing something as gentle as hydrogen peroxide with vinegar will immediately cause a chemical reaction that results in peracetic acid, which is very corrosive and dangerous.

In addition, it is not recommended to mix the two recommended deodorant ingredients such as baking powder and vinegar for use in spray bottles or on most surfaces. These two mixed together form a very intense chemical reaction that is great for cleaning things like clogged drains, teapots or coffee mugs with built-up debris or other “deeper” objects with stronger build-up, but the mixture is not ideal for other surfaces or purposes due to of its intensity along with the impressive mess it can cause. (If you’ve ever seen a child’s scientific volcano project erupt, the eruption is made by mixing baking soda and vinegar together!)

What if the lysol odor remains after several applications of vinegar?

If you have tried the above vinegar tricks and used baking powder on all relevant surfaces, but the lysol smell is still strong, you may need to scrub the surfaces that are still problematic with a hard and strong smelling detergent. You may also need to rent an upholstery steam cleaner from your local hardware store or grocery store if the lysol consumption was extreme enough to penetrate too deeply into the plagued substances.

If none of these methods succeed, it may be best to hire professionals to try to remove the odor in case something essential like an entire container of Lysol was used in a concentrated area and the odor cannot be removed.

Concluding thoughts

When there is an overwhelming smell of Lysol in your home or vehicle, it can be disturbing to say the least. Vinegar is always a good way to go – it is safe, effective and can act as a dream when used in combination with oils and even the sun. For soft surfaces, baking powder is a fantastic go-to that has been trusted for decades.

However, if you make several attempts and you are not successful in getting rid of the odor, it may be best to hire a professional cleaning service if you simply cannot remove the odor from your home.

Also see:

Speed Queen vs. LG Washers: A Close-Up Look

Speed Queen vs. LG Washers reviews: ultimate guides

Speed Queen vs. LG Washers: A Close-Up Look
Now we discuss about Speed Queen vs. LG Washers reviews. Buying a new washing machine can be overwhelming and a lot of the time just seeing them up close at your local dealer will not give you enough information to make an informed decision. With all the different options – load sizes, agitator or no agitator, front load versus top load – it can feel almost impossible to find the best washing machine for your home. Fortunately, we’ve taken the time to compare two of the best brands to make your decision-making process significantly easier.

Two of the best brands on the market are Speed ​​Queen which is traditionally known as being a commercial washing machine brand – and LG, known for its wide range of products across all categories of housing and electronics needs. But when it comes to slices, not all of them are created equal. Why should you choose one of these washing machines over the other?

To help you decide which washing machine brand is best for you, we have gathered information on both LG and Speed ​​Queen to condense their main features so you can learn more about which brand’s products best suit your specific need. We will compare the Speed ​​Queen Home Style Mechanical Top Load Washer with the LG Smart Wi-Fi-enabled all-in-one washer / dryer. We will look at the capacity of the discs, whether they have a stirrer or not, the energy consumption of the discs and their functions.

q? encoding=UTF8&ASIN=B07DF6CPP9&Format= SL250 &ID=AsinImage&MarketPlace=US&ServiceVersion=20070822&WS=1&tag=homelizationg 20&language=en US

Speed ​​Queen is known worldwide as the # 1 seller of commercial washers and dryers, but they have also grown in popularity for their private machines. Speed ​​Queen discs are made with durability in mind and they are perfect for those who are more interested in efficiency than features.

  • Size: 25.625 “x 43” x 28 “
  • Type: Top load
  • Capacity: 3.19 cu. ft.
  • Drum material: Stainless steel
  • Agitator: Yes
  • RPM: 710
  • Washer / dryer combination: No.

What is the capacity of Speed ​​Queen Home Style Washer?

The capacity of the Speed ​​Queen Home Style washing machine is 3.19 cubic feet, which equates to about 16 pounds of laundry.

The Speed ​​Queen brand is usually seen in laundries and not at home, but that is not to say that these newer models cannot also be used as daily washing machines. Their capacity is decently high and they should be able to handle duvets and plenty of towels with ease.

Does the Speed ​​Queen Home Style Washer have a stirrer?

Yes, the Speed ​​Queen Home Style washing machine has a stirrer.

Once a staple for all discs, stirrers have slowly gone out of fashion over the last decade. Washing machines are more likely to be made without a stirrer these days, which some users prefer and others do not.

While agitators are a little harder on the laundry in the long run, many believe they provide unsurpassed cleaning.

Since Speed ​​Queen washers are primarily made for commercial use, they must be able to provide a thorough cleaning every time. To be efficient and get any load of laundry as clean as possible, most commercial washing machines – Speed ​​Queen included – are built with agitators.

Is Speed ​​Queen Home Style Washer Energy Efficient?

Although the Speed ​​Queen Home Style Washer is not Energy Star certified, it still complies with the current U.S. Department of Energy water and energy standards for commercial washing machines.

All washing machines, whether commercial or not, must meet certain energy consumption standards. Since the Speed ​​Queen is usually a commercial washing machine, it meets the specifications of commercial washing machines, but not necessarily those set for private washing machines.

However, this does not mean that Speed ​​Queen is not energy efficient. Laundries want to save water and energy just like homeowners. As Speed ​​Queen is the most recognizable commercial brand of washing machines on the market, it is safe to say that they are decently efficient when it comes to energy consumption.

What are the special features of Speed ​​Queen Home Style Washer?

Speed ​​Queen Home Style Washer has 4 settings:

  • Soaking / Pre-washing
  • Heavy Duty / Permanent Press
  • Normal Eco
  • Delicate

This is a fairly small number of options for a modern washing machine; but because the Speed ​​Queen is regularly used for commercial purposes, it does not have many bells and whistles. Instead, it is a simpler machine that focuses on deep, thorough washes each time instead of having a wide range of features or settings.

q? encoding=UTF8&ASIN=B087D8MZCS&Format= SL250 &ID=AsinImage&MarketPlace=US&ServiceVersion=20070822&WS=1&tag=homelizationg 20&language=en US

LG, which stands for “Life’s Good”, is a South Korean company that not only manufactures washers and dryers, but also televisions and other household appliances. LG is proud of their sleek design and cutting-edge technology to stand out from their competitors.

  • Size: 27 “x 39” x 30.25 “
  • Type: Front load
  • Capacity: 4.5 cu. ft.
  • Drum material: Stainless steel
  • Agitator: No.
  • RPM: 1300
  • Washer / Dryer Combo: Yes

What is the capacity of LG Smart All-In-One Washer / Dryer?

The LG Smart All-In-One Washer has an impressive drum capacity of 4.5 cubic feet.

Having a large capacity is a must for a home washing machine, and the LG Smart Washer / Dryer delivers with a capacity that is significantly greater than the Speed ​​Queen.

With a capacity of this size you can wash duvets, lots of towels, small blankets and even down duvets!

Does the LG Smart All-In-One Washer / Dryer have a stirrer?

No, the LG Smart All-In-One washer / dryer does not have a stirrer. It uses a rotating tub to clean the laundry instead of a rotating agitator.

An agitator might be able to make the clothes cleaner, but it can actually wreak havoc on your more delicate laundry and wear them down faster. If you plan to wash things like lingerie, stick to a washing machine without a stirrer.

When using a washing machine without a stirrer, you are less likely to have clothes tangled, bra straps torn or stretched, or clothes damaged from the wash cycle.

Is the LG Smart All-in-One washer / dryer energy efficient?

The LG Smart All-In-One Washer / Dryer is not Energy Star certified, but it complies with US Department of Energy standards for water and energy for home washing machines.

Since the LG Smart Washer / Dryer is a washer / dryer combination, it is a little harder to measure how energy efficient it is.

Due to their washing method, front-loaded washers are almost always more energy and water efficient than their top-filled counterparts.

What are the special features of the LG Smart All-in-One Washer / Dryer?

The most striking feature of the LG Smart All-In-One washer / dryer is right there in the name: it washes and dries your clothes in just one machine!

Being able to wash and dry your laundry in just one machine is an innovation that will change the way you wash forever! It not only saves you having to move the laundry between the machines, but it also saves a huge amount of space.

In addition, the LG Smart Washer / Dryer has 14 different wash cycles and can be connected to Alexa and Google Home, so you can wash your clothes on the go. The LG app allows you to control the laundry’s start times and drying times, as well as notify you when your laundry is finished.

The wash cycles included on this machine are:

  • Normal
  • Heavy duty
  • Linens
  • Bright white
  • Sanitary
  • Allergenic
  • Bathtub clean
  • Towels
  • Perm. Press
  • Sportswear
  • Delicatessen
  • Speed ​​Wash
  • Drain + spin
  • Downloaded

Other features include LoDecibel low-noise operation, six different washing modes to maximize efficiency, steam mode to remove wrinkles without washing and TurboWash – which LG claims will halve your washing and drying time.

Skip to content