How to remove sticky residue from tile floors learn from all best home

by Jan 22, 2021Cleaning

Learn simple ways How to remove sticky residue from tile floors from allbesthome. Tile floors are one of the easiest to clean among all floor types. Even daily cleaning with water does not damage the tile floor a bit. Instead, you provide a clean, disinfected surface that you, your children, pets, and other family members can walk on.

Just as it is easiest to clean, it is hardest to find sticky residue on the slippery tile floors. Unless you have not cleaned your kitchen for several months and let oil, dirt, spices mix and blend with heat and moisture and create the most sticky residue on the tile surface, the sticky residue is not a common sight on tile floors. Even it is easy to clean.

The sticky residue in injection mortar lines can be a nightmare, but not as challenging to clean as you assume. Yes, like the easy mopping, it is also easy to clean the most sticky residue from tile floors. Just below we talk about how to remove sticky residue from tile floors, also with the ubiquitous household products.

How to remove sticky residue from tile floors

First things first

But first, unless you were too rude and used a cleaning agent that caused a sticky tile floor, yet you continued to use the same to clean the floor, there is no chance that there will be stickiness all over your tile floor. So when it comes to removing sticky residue, it basically means stain cleaning. So whatever product you use will be minimal and straight on the specific areas or spots. It can be waste, adhesive, solid food, anything, and all of these are considered sticky residues and need potent but very common cleaning agents.

Related post  How to Remove Bad Vacuum Cleaner Smells

Things you need

  • Diet and dirt
  • Vinegar
  • Hot water
  • Baking soda
  • Soft brush
  • Microfiber cloths or pads
  • Scrubbing pad
  • Rigid brush
  • Spray can
  • Stick mop

Step # 1 – Dusting

The first step to deep cleaning a surface is always dusting. But before brushing dirt off tile floors and spot cleaning the sticky residue, be sure to scrape loose dust particles from the attached dirt. Use a toothbrush or scrub pad and preferably a brush with a stiff brush and gently rub the rest. Pour a little warm water to soften the sticky residue if necessary. It works well, especially on the joint lines. If using water, wipe the stains and then dust thoroughly.

Step # 2 – Make the solution and paste

We need a strong cleaning solution and insert when we clean sticky residues.

Vinegar, hot water, and dish soap

Take a spray bottle, pour half of it with warm water, and the rest of it with vinegar. We do not have too much diluted vinegar, if you have noticed. To make the solution even more lethal to dirt and sticky residue, add a few drops of dish soap.

Baking soda and vinegar

Now make the baking powder paste. Take baking powder in a bowl and add vinegar to make a paste. We do not use water. Instead, we use vinegar to double the cleaning effect of baking soda.

The vinegar solution cleans the sticky residue on the tiles, and the baking powder cleans the sticky residue from the injection mortar lines. Now you are ready to apply the solution or paste depending on the stains you are trying to clean.

Related post  4 reasons why Spaghetti Scrub is better than a sponge

Step # 3 – Apply the paste

Baking soda will take some time to set on and work on the sticky residue. Then first target the sticky residue on the joint lines. Apply the paste on the grout lines and let it sit until it dries. Not too dry, but dry to an extent to pull and stick dirt to it and moist to the extent that you can easily remove it.

So we suggest not focusing on other things, but applying the paste on each sticky residue in the injection mortar lines and getting back to the first one. Start scrubbing the grout lines with the stiff bristle brush and the sticky residue will come off pretty quickly.

Once it has gone off, wipe it off with a damp pillow. Be careful not to overdo the cleaning here. If there are any leftovers, leave it. The remaining residue that you can handle in the next session and wait for the next session will also ensure that the injection mortar lines are safe and not scrubbed too much.

You need to keep in mind that the tile materials and materials in sealants are completely different. Grout lines need milder cleaning compared to tiles.

Step # 4 – Clean the sticky residue from the tiles

When you have finished cleaning the tile’s grout lines, spray the vinegar-water solution and immediately rub the sticky residue on the tiles with a soft microfiber scrub pad.

A scrub pad works faster than a stiff-bristled brush in wider spaces. Continue scrubbing until the sticky residue is cleaned and removed from the tiles. If the residue appears to be too sticky, spray the vinegar-water solution and wait for five minutes.

The sticky residue breaks off from the inside and turns into fine particles, and with a light rub you can wipe it off the tiles. Even here, use the damp microfiber cloth to wipe off the loose sticky residue.

Related post  5 Best Ways to Recycle a Vacuum Cleaner

Step # 5 – Mop the floor

You have now removed the sticky residue from the joints as well as the tiles. Before the remaining residue of the vinegar-water solution and the already cleaned sticky residue are dry and stick again to the surface of the tile, wipe the entire tile floor with the vinegar-water solution. This time, the relationship will not be equal parts. It becomes a cup of vinegar in a liter of warm water. Use your standard stick mop. Moisten it in the solution and mop the tile floor after thorough squeezing.

Step # 6 – Wipe the floor

To prevent dust from sticking damp tile floor or the floor gets footprints, or your pets or children fall due to slippery wet tiles, be sure to have the fan turned on at full speed. It is a better, immediate and convenient solution for wiping the tile floor than wiping with a stick mop or a clean cloth.

Although we do not prefer it much, even if you have not cleaned your tile floors for too long and it is filled with sticky residue, bleach is a good option to clean them. After a thorough deconcentration with water, wipe your tiles and joints with a cloth dampened with bleach and water solution. Otherwise, it is enough to follow the above steps to clean any type of sticky residue from your tile floor.

RSS50
Facebook57
Twitter35
Pinterest69
fb-share-icon
Skip to content