What is the ideal height and design for a shower enclosure?

by | Sep 24, 2021 | Bathroom decor ideas | 0 comments

Shower trays are very convenient, especially for small bathrooms. It provides an easy and convenient way to store shampoo bottles, lotions and other things, and they eliminate the need for shower enclosures and racks.

Shower room

This ensures a clean and simple overall design and structure that fits most modern and contemporary bathrooms. However, a question arises: What is the right height for a shower or a bathtub? Find the answer below.

What is a shower?

Looks like a cubbyhole, a shower cubicle is a storage area with an open design that is located within the wall of your bath or shower and is used to store all your bathroom clothes.

Niches are not only used in showers, but they can also be used in bathtub environments. They are an organized and simple method of storing your frequently used bath products.

Those who share a bathroom understand the problem of maintaining adequate space for everyone’s bathroom requirements without creating a major mess.

Maybe you have incorporated a shelf or a shower cubicle into your shower or tub to create extra space. However, shelves and shower enclosures can be difficult to clean, are bulky, and contribute to the appearance of a cluttered shower. Due to the amount of moisture and water in your bathroom, metal fixtures rust over time.

A shower enclosure is a far better solution that is quite inexpensive. It is a very useful feature that allows you to store your shower accessories properly without resorting to organizers that fill valuable space. Daily shower objects can be hidden inside the shower wall.

Install error when installing a shower enclosureSee in gallery

Install error when installing a shower enclosure

Installing a shower enclosure is more complex compared to just hanging an organizer in your bathing area. This is why people are more likely to make mistakes and therefore we would show the most common mistakes why they happen and how they can be avoided.

Error: You are not installing a waterproofing membrane.

Explanation: To prevent this critical shower faulty installation error, select a shower enclosure that contains an integrated flange that is added for waterproofing. This particular component is important because you want the shower enclosure waterproofing membrane to remain intact.

Error: You installed the niche in an exterior wall.

Explanation: This installation is often a major installation error in the shower niche, as moisture can easily accumulate behind your niche if not performed properly. In general, it is always better to construct your shower enclosure in a wall that is not exposed to the outside.

Related post  20 Magnificent samples of bathrooms with beautiful rugs

The problem is that the shower environment is quite humid, which means that moisture will always find its way into the nozzle cavity via the wall tile, the tile backplate, and often via the tiled shower enclosure.

Error: You are compromising the wall structure.

Explanation: Another common mistake in the installation shower niche is the construction of a custom horizontal tiled niche that threatens the structural stability of the shower enclosure.

If you tackle the idea of ​​installing or building a niche in your shower, you have probably seen many instances of this type of niche. These horizontal recesses include richness, often extend the entire shower wall, and provide a huge amount of storage space.

Despite the fact that there is a method for the proper and safe installation of these shower niches, many contractors do not. Most excellent contractors will argue that proper framing of the niche will effectively reinforce the structure.

The problem is that these solutions often address structural pressures exerted from above, but rarely address the increased flexibility (decreased stiffness) caused by the elimination of the vertical framing.

Error: You do not select a custom shower.

Explanation: If you choose to install a prefabricated or finished shower enclosure instead of a custom-built one, you can avoid making another shower enclosure error by avoiding retrofitting shower enclosures. The design of a retrofitted niche makes it possible to insert it after the shower wall has been laid and grouted.

While this seems to be a slightly easier method of installing a shower enclosure, it is not significantly easier compared to what is required to install the finished shower enclosure elements now available, and it violates the industry’s recommended “best practices. ”

Error: You skip the waterproofing part.

Explanation: If you intend to build a custom shower enclosure and want to prevent one of the most common shower enclosure installation errors, make sure you or your contractor do not overlook the waterproofing phase. When a tailor-made niche is designed correctly, it can look quite substantial, solid and waterproof.

Although the joints appear to be tight in a newly created niche, they do not prevent water from infiltrating and flowing into the stud cavity if the niche is not properly waterproof. It makes no difference whether you or your contractor uses a layer or a liquid waterproofing membrane, as long as this critical step is not skipped during your future shower remodel!

How to Build a DIY Shower Enclosure

How to Build a DIY Shower EnclosureSee in gallery

A DIY shower is a time consuming project, but it is not complicated at all. Below is a list of the materials needed for the project as well as the steps that will lead you towards completion.

Related post  Storage benches in 20 beautiful bathrooms

What you need:

  • A multi-tool
  • Wood framing
  • Tile equipment
  • Ommer inch cement board
  • Measuring tape
  • Cement slab tape
  • Swiss Army knife
  • Thin set
  • Miter saw
  • Waterproof membrane
  • Screws
  • Tiles
  • Spacers

Step one: Measuring the tiles

Arrange your tiles on a flat surface and add spacers to the height where you want your niche to begin. Then measure and mark the beginning and end of each tile using a straight board.

Step two: Sizing the niche

You need to know how big your niche is going to be. Once you have the correct measurements, you can build it using 2-by-4s.

Step three: Mounting the niche in the studs

Using plywood, you can secure the niche in the pins using screws. With the multi-tool you can cut the underside of the cement board for a tight fit.

Step four: Adding cement board

You will attach the cement slab to all sides of the niche, so be sure to measure and cut it accordingly. You must first place the top boards and shelves and then rinse with the cement board to the wall.

Step five: Inclined shelf

You want to do this so that the water runs off. To do this, you can add a series of spacers on the back and then use screws to place the cement slab on top.

Step six: Do the finishing touches

Finishing the niche means you will need to cover all the joints with tape, seal them with special sealant, let them dry, sand them and then paint the waterproofing membrane on top.

Step seven: Tile niche

Tiling your niche ensures that it fits into the rest of your bathroom look.

Shower Enclosure Designs

Marble shower cubicle with three shelves

Marble shower cubicle with three shelvesSee in gallery

The ideal height of a shower cubicle is from chest to eye level when standing. However, it is strictly related to the height of each individual person. On average, this usually means a height of 120 to 150 cm. {foudn on janinedowling}.

Glass panels for shower

Glass panels for showerSee in gallery

It is not the height where you place the shower niche that is important, but also the proportions in the niche itself. It again depends on what you plan to use the niche for specifically. This suite by LA Closet Design is a great source of inspiration.

Black shower

Black showerSee in gallery

Make sure the shower cubicle suits your needs. It does not have to be very high if you only plan to keep a few small bottles of shampoo or lotion in there anyway, and it does not have to be extra wide if you do not need it. This design of GIA renovations is very well balanced in this sense.

LED light for shower

LED light for showerSee in gallery

A bathtub niche should of course be placed lower so that you can easily reach it while in the tub. That means placing it just a little higher than the tub and a place where it is easily accessible. This bathroom from Cartelle Design can give you some inspiration.

Related post  Interesting stand out bathroom design ideas - allbesthome

Porcelain tiles

Porcelain tilesSee in gallery

There is no standard shape or size for a shower enclosure, which means you can customize it in any way you see fit. This one, for example, has an irregular design that is mostly long and narrow, but also contains a high section. It is designed by First Lamp.

Chevron tiles for the bathroom

Chevron tiles for the bathroomSee in gallery

Another cool idea is to add a shelf to your shower to pretty much split into two sections. This can make it easier to organize your toiletries and other things.

Honeycomb shower

Honeycomb showerSee in gallery

The best thing about a shower enclosure is that it is embedded in the wall. It helps save space and also means you can get pretty creative with the design. Check out this stylish flower-shaped niche shared by warmyourfloor on Instagram. It looks fantastic.

Subway Tiles Shower Enclosure

Subway Tiles Shower EnclosureSee in gallery

When building or designing the shower enclosure, you can use the wall tiles as a guide. This way, the niche can fit in nicely without disturbing the pattern. Of course, the ideal height should be prioritized. Check out this beautiful design shared by dettmore101 for inspiration.

Mosaic Large shower with niche

Mosaic Large shower with nicheSee in gallery

It is usually a good idea to have the niche on a wall opposite or next to the shower head so that you can access the items without reaching through the shower spray. In this particular niche goes from end to end.

Marble shower cubicle with LED light

Marble shower cubicle with LED lightSee in gallery

There is plenty you can do to customize a shower stall and make it stand out, including adding accent lighting to it. Built-in LED lamps can illuminate the niche in a really cool way, creating a nice glow and adding character to the entire bathroom. Check trends for more great lighting ideas.

Black frame for shower glass

Black frame for shower glassSee in gallery

Another cool way to make the shower niche stand out from a visual point of view is by using materials, finishes and colors that contrast with the surrounding wall. A good example in this regard is the design created by studio Biasol.

Shower cubicle with glass shelves for the niche

What is the ideal height and design for a shower enclosure?See in gallery

Returning to the introductory question (what is the right height for a shower cubicle), we will also mention that the proportions and design are very important in this case. Studio ONE SEED Architecture + Interiors created a high and narrow niche with three levels here. All three should be easy to reach, meaning the center of the niche is likely to be located at the ideal height.

RSS50
Facebook57
Twitter35
Pinterest69
Skip to content